Pukas – Surfboards
ADRIANO DE SOUSA Pro Model – Shaper: Peter Daniels (P.1+)
Size: From 4’10” to 6’ 3”
Tail: Swallow, squash or round
Bottom: Slight single to double or slight single between fins
Comments: Narrower outline, domed deck, tapered low boxy rails. Based on the same curves as Adriano´s ASP World Tour board. Speedy and responsive for the naturally talented super surfer.
TOURNAMENT – Shaper: Peter Daniels (P.1)
Size: From 5’8” to 6’ 6”
Tail: Squash, round or round pin
Bottom: Medium to deep single concave
Comments: Smooth outline and rocker with soft, semi boxy rails. A stylish all around performer with even volume distribution for catching waves easy and lots of speed and manoeuvrability.
THE ONE – Shaper: Peter Daniels (P.2)
Size: From 5′8″ to 6′10″
Tail: Squash, rounded pin, thumb
Comments: Fuller outline, balanced rocker and evenly distributed volume, medium -full soft boxy rails. Dead flat or slightly concaved bottom contour. Designed for easy paddle and maneuverability-very forgiving for the serious, funloving recreational surfer in all conditions from 1 to 8 feet waves.
SUPER BALANCE – Shaper: Peter Daniels (P.3+)
Size: From 5′10″ to 6′8″
Tail: Swallow, squash or round
Bottom: Single concave from tip to tail
Comments: With beefed up rail volume, a longer high rocker entry and same well balanced profile and volume distribution makes the 2009 model catch free, good for landing punchy aerials and good paddler to catch any waves in all condictions.
LOW GRAVITY – Pro Model Aritz Aramburu – Shaper: Peter Daniels (P.3+)
Size: From 5′8″ to 6′4″
Tail: Squash or round
Bottom: Medium to deep single concave or slight single to double concave
Comments: this year more volume than last year-wider and thicker keeping volume in tail and fuller soft box rails for solid strong legged surfing and making difficult sections easy-around, over thru and airs.
JAPANESE FISH – Shaper: Peter Daniels (P.4)
Size: From 4’ 10” to 6’ 6”
Tail: Swallow
Bottom: Single to triple concave to vee
Comments: Wider outline lower. Rocker soft boxy rails for easy paddleling and manubrability in small flat waves. Order this model shorter, wider and thicker than regular.
STOCKY – Pro Model Sunny Garcia – Shaper: Peter Daniels (P.5)
Size: from 5′10″ to 6′10″
Tail: available also in squash or rounded pin
Bottom: Six channel bottom, reverse vee or single concave
Comments: Same smooth full outline as 2008, flatter rocker with plenty of volume in middle and thinned out considerably in nose and tail. A smooth Stylish allround performer to let the bigger guys catch waves easy and turn on a one cent coin, eev and concave available.
ROCK AND ROLL – Shaper: Cobianca (C-1)
Size: from 5′8″ to 6′5″
Tail: Swallow,squash, round or round pin
Bottom: Single to double concave
Comments: Made especially for heavy waves. More rocker both in the nose and tail, with a combination of single to double concave allowing for better control at higher speeds. Ideal for hollow waves.
PICK UP – Shaper: Cobianca (C-2)
Size: from 5′8″ to 6′5″
Tail: Squash, round and swallow
Bottom: Single to double concave
Comments: All around board, with a combination of very clean, mellow rockers and a single concave to a deep double concave.
BEACH BREAKER – Shaper: Cobianca (C-3)
Size: from 5′8″ to 6′5″
Tail: Swallow, squash, round or round pin
Bottom: Single concave
Comments: This board has more volume than normal and low rocker in the nose. A single concave all the way through allows for better floatability at lower speeds on fatter, mushier waves.
SQUID – Shaper: Cobianca (C-4)
Size: from 5′8″ to 6′5″
Tail: Swallow
Comments: A very fun fish board with low rocker throughout, lots of volume and e V bottom. Can be used with 2, 3, or 4 fins, depending on the conditions; 2 fins for mushy waves, 3 fins for normal beach break conditions and 4 fins for fast, hollow waves.
TWIN BARREL – Shaper LSD (L3)
Size: from 5′8″ to 6′5″
Tail: Squash or swallow
Bottom: Deep double concave with single concave
Comments: This model is a speed machine. Lower entry rocker and fuller outline, working together to create lots of speed. The rails are medium boxy allowing flow through the turns. For beach breaks, it will power out on the open face and turn tight in the pocket when needed to.
FAT 4 – Shaper: LSD
Size: from 5′0″ to 6′6″
Tail: Swallow
Bottom: Single concave
Comments: Board disegned for smaller waves, this model is also a favourite of the team as an air board. More area and thickness for easy paddling and speed. Recomended with four fin set up for increased acceleration.
BARRACUDA – Shaper: LSD (L4)
Size: from 4′6″ to 6′4″
Tail: Swallow
Bottom: Single concave into double
Comments: This model has a more retro outline with plenty of area for super easy speed, even in the weakfest of conditions and also makes it an easy board to paddle. The Barracuda is now available in a quad fin set up (Barracuda 4).
AXCEL – Shaper: Tokoro (T1)
Size: from 5′8″ to 6′5″
Tail: Swallow, squash, round, or round pin
Bottom: Single to double concave
Comments: The Axcel is from the word accelerate which is to increase speed. The Axcel is a modified version of the E-5, lowering the rocker and increasing concave gives this model increased speed and still have the turning charactersitics of the E-5. If you are a surfer looking to be on the cutting edge of surfing this is the model for you.
ELITE – Shaper: Tokoro (T2)
Size: from 5′8″ to 6′5″
Tail: Squash or round
Bottom: Single concave
Comments: Here is the choice for the competition surfer from the WCT to the amatuers. This is the design of choice with the team and the feed back has been great in all types of conditions. Lots of drive and projection with controled manuverability.
E-FISH – Shaper: Tokoro (T4)
Size: from 5′3″ to 6′4″
Tail: Swallow
Bottom: Rolled vee to concave to double concave vee
Comments: In 2008 we have made some minor adjustaments to the e-fish and updated to the e-f2. This is a design that is great in small to head high surf and should be ordered 3″ shorter, 1″ wider and 1/8″ thicker. You can have it as a thruster or quad.
